Lloyd's LC-1355 Quick Manual page 15

15.
Ensure that the heater does not come into contact with water or other liquids. If
the appliance accidentally gets wet or immersed in liquid, turn the heater off at
the power switch, and disconnect the plug from the outlet. Carefully dry both plug
and outlet before reconnecting.
16.
Unplug the appliance from the outlet when not in use.
17.
After removing the packaging, check that the device is intact. Packaging compo-
nents (plastic bags, unicell, sponges, etc.) should not be left close to children as
they are potentially dangerous.
18.
Ensure that the airflow is unobstructed to optimize the heating performance.
Avoid installing it in corners or small spaces.
19.
Do not hang the appliance or place it next to a wall.
WARNING:
To avoid any risk of fire or overheating, do not cover the heater with any
object.
2. Overheating protection
In the event of overheating, the heater will automatically shut down. When this ha-
ppens, unplug it for about 30 minutes until it cools down completely, and check that
no objects obstruct the grilles that may cause the overheating. Then turn it back on
and verify that it works properly. If not, turn it off again and consult a qualified tech-
nician. For safety, the heater will automatically stop operating when it is tilted or in
motion.
3. Cleaning and maintenance
1.
Clean the exterior surfaces of the heater regularly with a damp cloth. Never rinse
or immerse directly in water. Be sure to unplug the device before cleaning.
2.
Do not use flammable or abrasive substances to clean the device.
3.
Never disassemble the heater when a malfunction occurs. In this case, consult a
qualified technician.
4.
If the heater is unused for long periods, unplug it and store it in a dry place away
from dust and sunlight.
15