Indicator
Name
Low Tire
Pressure/TPMS
Indicator
On/Blinking
●
May come on briefly if the power
mode is set to ON and the vehicle
is not moved within 45 seconds,
to indicate the calibration process
is not yet complete.
Comes on and stays on when:
●
- One or more tires' pressures are
determined to be significantly
low.
- The system has not been
calibrated.
Blinks for about one minute, and
●
then stays on if there is a problem
with the TPMS.
Comes on if the TPMS is
●
deactivated temporarily after the
12-volt battery has been
disconnected, then reconnected.
Explanation
●
Comes on while driving - Stop in a safe
place, check tire pressures, and inflate the
tire(s) if necessary.
Stays on after the tires are inflated to
●
the recommended pressures - The
system needs to be calibrated.
2 TPMS Calibration P. 492
Blinks and remains on - Have your
●
vehicle checked by a dealer.
Drive a short distance at more than 12 mph
●
(20 km/h). The indicator should go off. If it
does not, have your vehicle checked by a
dealer.
uuIndicatorsu
Message
Continued
99