Sony DVW-A500P/1 Operation Manual page 140

Item number Item
REGEN CONTROL
610
MODE
Settable range Function
[0]
Specifies whether the time code signal is automatically
auto (assem & insert) edit
auto assemble edit
1
regenerated or not, during editing using the control panel of
manual
2
the VTR.
3 assemble & insert
0: When the VTR is used as a recorder for editing, the time
1: When the VTR is used as a recorder for ediing, the time
2: The time code generator operates in accordance with the
3: The time code generator regenerates the time code
code generator automatically regenerates the time code
signal using the time code on the tape during assemble
or insert edit no matter what the setting of the [F6] (TCG
SOURCE) button in the TC menu is.
code generator automatically regenerates the time code
signal using time code of the time code generator on the
tape during assemble edit only, no matter what the
setting of the [F6] (TCG SOURCE) button in the TC
menu is.
setting of the [F6] (TCG SOURCE) button in the TC
menu, regardless of the operating mode of the VTR.
signal in the off-tape LTC signal when edit preset is set
to ON (assemble/insert), regardless of local or remote
control.
A-23
Appendix