Table of Contents
Advertisement
4. Remove the Jig.
Notes:
• Ensure that you attach the mylar to the trackpad after replacement.
• Ensure that the connector is attached firmly.
1180 Power button with fingerprint reader assembly
For access, remove this FRU:
• "1020 Nano-SIM-card tray (for selected models)" on page 62
• "1010 Base cover assembly" on page 61
• "1100 M.2 solid-state drive" on page 70
• "1030 Wireless WAN card (for selected models)" on page 62
• "1050 Speaker assembly" on page 64
• "1070 Built-in battery" on page 67
• "1040 Memory module" on page 63
• "1120 DC-in bracket and DC-in cable" on page 75
• "1150 System board (for models with hybrid graphics only)" on page 79
• "1160 Combined system board assembly (for RTX models only)" on page 83
88
ThinkPad P1 Gen 6 Hardware Maintenance Manual
Advertisement
Table of Contents
