Grundig GMS0510 User Manual page 13

OPERATION
Settings
Your appliance has the following settings:
Temperature­level/blower­level­
– 0: Off
– 1: Gentle air flow and moderate temperature for
gently drying and styling
– 2: Strong air current, high temperature for quick dry-
ing
Cool­shot­
G
– d : Interrupts heating and provides a cool air flow
Changing­the­styling­­ a ttachments
1
Detach the attached styling attachment
pressing on the catch (on the back of the appliance)
B ­ and turning the hot air brush slightly to the right.
2 Place another styling attachment on so that the recess
and the catch B (on the back of the appliance) are
­
in line and turn slightly to the left until it clicks.
Operation
Check if the mains voltage on the type plate (on the
handle of the device) corresponds to your local mains
supply.
1 Thoroughly towel dry your hair after washing.
2 Plug the D power cord into the wall socket.
3­
Turn on the appliance with the switch
the required temperature level/blower level.
4 If necessary, interrupt heating by pressing and hold-
ing down the G button (Cool Shot).
Cool Shot interrupts heating and provides a cool air
7
flow. This allows you to fix your hairstyle better and
more lastingly.
5
After use, switch off the appliance with the
switch and pull the plug of the mains
C
cable D out of the socket.
Never wind the mains cable around the appli-
7
ance, because this
Please check the appliance and the cable regularly
for visible damage.
­ ___________________________________________________________
C
A ­ by
C and set
can cause damage.
Cleaning­and­care
Pull the plug out before cleaning.
Never submerge the appliance in water.
Use a soft, dry cloth to clean the housing. Clean the air
inlet grille E occasionally with a soft brush to remove
hairs and dust.
13­
ENGLISH