Advertisement
Quick Links
Advertisement
Related Manuals for Ulefone Armor 15
Summary of Contents for Ulefone Armor 15
- Page 1 Armor 15 uBuds Inside USER MANUAL...
- Page 2 Buttons and Parts Multi-Function Touch Key Ear Tip Microphone/Indicated Light Charging End...
- Page 3 (1) Charging. Put the earbuds in the charging case (on the top of Armor 15) to charge, when the earbuds are charging, the red light is always on and the status bar at the top of Armor 15 will display the earbuds battery icon and charging prompt; when the earbuds are fully charged, the indicat- ed light goes out and the battery prompt disappear.
- Page 4 ③ Low Power Shutdown: When the earbuds battery voltage is lower than 3.2V, the earbuds will au- tomatically shut down. Pairing and Connection TWS Pairing Pick up two earbuds from the charging case to flash between a red and blue light (When TWS is not paired), and the two earbuds are automatically paired (There is a “TWS Pair Successful”...
- Page 5 Common Pairing (1) Connect Manually Find the Bluetooth menu in the Settings and turn Bluetooth on; search for Bluetooth devices and select " uBuds Inside" to pair. (with a “Bluetooth Connection Is Successful” tone and the indicated light goes out.) (2) Reconnect Automatically When the earbuds is on and paired with TWS successfully (with a “TWS Pair Successful”...
- Page 6 Bluetooth Disconnected (1) Disconnect for Great Distance The earbuds and the mobile phone are disconnected for the distance is too far. If the earbuds can not be back to the working area within 3 minutes, it will dis- connect the Bluetooth and turn off. ...
- Page 7 Functions and Operations Call Scene When the earbuds is in the pairing state, after connecting with the mobile phone, when there is an incoming call, there will be a ringtone reminder of the incoming call. (1) Answer Incoming Calls Double click the left or right earbud switch button to answer the call. (In single ear mode, operate in the same way) ...
- Page 8 Music/Standby Mode (1) Play / Pause When the earbuds is in the pairing state, after connecting with the mobile phone, select the APP playback software you need to start, then double click the left or right earbud switch button to start playing music; double click the left or right earbud switch button again to pause the music playback.
- Page 9 Operation Exception Handling Method (1) There is no sound in a certain earbud due to improper operation or long-time shielding of the earbud signal. Please try to move to the range where the signal can be received to restore normal. (2) For failures caused by unknown causes, turn off the earbuds and then turn it on again.
- Page 10 (5) If the two earbuds have been paired and connected to the mobile phone, there is no sound from the earbud after answering the call. You need to check the audio output of the mobile phone and select the Bluetooth pairing name (uBuds Inside) corresponding to the earbud before proceeding Bluetooth call.