Related Manuals for ZUDSEC ZDAC-2300
Summary of Contents for ZUDSEC ZDAC-2300
- Page 1 Standalone Access Control ZDAC-2300 User Manual Please read the manual carefully before use this unit...
-
Page 2: Packing List
1. Packing List Name Quantity Remarks Keypad User manual Φ20mm×60mm,Special for keypad Screw driver Φ6mm×30 mm Rubber plug , used for fixing Φ4mm×28 mm Self tapping screws , used for fixing Φ3mm×6mm, used for fixing Star screws Please ensure that all the above contents are correct. If any are missing please notify the supplier of the unit. -
Page 3: Specifications
3. Description The unit is single door multifunction standalone access controller or a Wiegand output keypad or card reader. It is suitable for mounting either indoor or outdoor in harsh environments. It is housed in a strong, sturdy and vandal proof Zinc Alloy electroplated case which is available in either a bright silver or matt silver finish. -
Page 4: Installation
Adjustable Alarm Time 0- 3 minutes Wiegand Interface Wiegand 26 bit Wiring Connections Electric Lock, Exit Button, External Alarm,External reader 6. Installation Remove the back cover from the keypad using the supplied special screw driver Drill 2 holes on the wall for the Self tapping screws and I hole for the cable Put the supplied rubber bungs to into the two holes Fix the back cover firmly on the wall with 2 Self tapping screws Thread the cable through the cable hole... - Page 5 common power supply diagram: special power supply diagram:...
-
Page 6: Sound And Light Indication
8. To Reset to Factory Default a. Disconnect power from the unit b. Press and hold # key whilst powering the unit back up c. On hearing two “Di” release # key, system is now back factory settings Please note only installer data is restored, user data will not be affected 9. - Page 7 Setting the working mode: Set valid card only users Entry is by card only Set valid card and PIN users Entry is by card and PIN together Set valid card or PIN users Entry is by either card or PIN (default) To add a user in either card or PIN mode, i.e.
- Page 8 To delete a card user by card. Note users Read Card can be deleted continuously without exiting programming mode To delete a card user by user ID. This User ID option can be used when a user has lost their card To delete a card user by card number.
- Page 9 For a card and PIN user Read card then enter PIN # 11.2 Door Settings Relay Output Delay Time To set door relay strike time Master code # 0～99 0-99 is to set the door relay time 0-99 seconds Door Open Detection Door Open Too Long (DOTL) warning.
Need help?
Do you have a question about the ZDAC-2300 and is the answer not in the manual?
Questions and answers