Table of Contents
Advertisement
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4.
Remove the keyboard/top cover (see
Remove the hard drive:
1.
Release the ZIF connector (1) to which the hard drive connector cable is attached, and then disconnect
the hard drive connector cable from the system board.
2.
Remove the four Phillips PM2.0×3.0 screws (2) that secure the hard drive to the bottom cover.
3.
Remove the hard drive (3).
4.
If it is necessary to disassemble the hard drive:
a.
Disconnect the hard drive cable adapter (1) from the hard drive.
b.
Spread the left and right sides of the hard drive bracket (2) to release the bracket from
the hard drive.
Keyboard/top cover on page
24).
Component replacement procedures
35
Advertisement
Table of Contents
