Century 2000 Pilots Operating Manual page 33

VOR Approach VOR Approach
Step 1. NAV/ATT or ALT.
The VOR approach usually
begins from an enroute
situation. The heading bug
and the OBS are set to the
same degree radial. The
autopilot is providing
crosswind correction to track
the desired radial.
Step 2. HDG/ATT or ALT.
As the VOR is neared, match
the heading bug to either the
course or the lubber line and
press HDG on the autopilot.
Set the OBS to the inbound
course. Control altitude as
necessary for the procedure.
Step 3. REV/ATT or ALT.
As the VOR is crossed, turn
the heading bug to the
outbound course and press
the REV button.
Step 4. REV/ATT or ALT.
The autopilot will track
outbound and correct for wind.
Control attitude with the
modifier switches. When the
desired altitude is reached
press ALT.
Step 5. HDG/ATT or ALT.
To start the procedure turn,
press HDG and turn the
heading bug to the outbound
procedure turn heading.
59
58