Century 2000 Pilots Operating Manual page 24

LOCALIZER Approach
STEP HSI
1
2
3
4
40
AP MODE REMARKS
The localizer or ILS approach
HDG
begins with a transition from
ALT or
the enroute structure to the
ATT
outer compass locator (LOM).
The heading bug is used to
select the desired heading.
The aircraft's altitude may be
controlled by the modifier
switch or through the use of
the altitude mode.
Inbound Front Course direction
is selected with the course
arrow.
REV Upon reaching the LOM, press
the REV switch. The autopilot
ALT or
will intercept and
ATT
outbound.
Upon tracking the localizer, the
REV
system will compensate for
ALT or
crosswind and enter the "soft
ATT
track" mode. The procedure
turn outbound heading may be
selected with the heading bug.
HDG At the appropriate time, press
the HDG switch to begin the
ALT or
procedure turn.
ATT
appropriate to this phase of the
approach should be controlled
using ALT or ATT
necessary
The
track
Altitude
as
LOCALIZER APPROACH
41