Honda ACCORD 2020 Owner's Manual page 647

Blade
Holder
Cap
uuChecking and Maintaining Wiper BladesuChanging the Wiper Blade Rubber
7. Insert the flat side of the new wiper blade
onto the bottom part of the holder. Insert
the blade all the way.
8. Install the end of the wiper blade into the
cap.
9. Slide the holder onto the wiper arm until it
locks.
10. Lower the passenger side wiper arm first,
then the driver side.
11. Set the power mode to ON and hold the
wiper switch in the MIST position until
both wiper arms return to the standard
position.
645