Radar Sensor - Honda ACCORD 2020 Owner's Manual

uuHonda Sensing®uRadar Sensor

Radar Sensor

Radar
Sensor
Do not apply paint, stickers, or
attach accessories to the front
part of the radar sensor or the
surrounding area.
574
The radar sensor is at the lower part of the
front bumper.
• Do not change the position of the radar
sensor or any of the surrounding parts.
• Do not apply paint, stickers, or attach non-
genuine accessories to the front part of the
radar sensor or the surrounding area. Be
particularly careful that any custom license
plate frame or other accessory does not
block any part of the radar beam path (see
adjacent illustration).
1Radar Sensor
Avoid strong impacts to the radar sensor cover.
For the CMBS TM to work properly:
•
Always keep the radar sensor cover clean.
•
Never use chemical solvents or polishing powder
for cleaning the sensor cover. Clean it with water
or a mild detergent.
•
Do not put a sticker on the radar sensor cover or
replace the radar sensor cover.
If you need the radar sensor to be repaired, or
removed, or the radar sensor cover is strongly
impacted, turn off the system by using the safety
support switch and take your vehicle to a dealer.
2 CMBS TM On and Off P. 516
If the vehicle is involved in any of the following
situations, the radar sensor may not work properly.
Have your vehicle checked by a dealer:
•
Your vehicle is involved in a frontal collision.
•
Your vehicle drives through deep water or is
submerged in deep water.
•
Your vehicle strongly strikes a bump, curb, chock,
or embankment that could jar the radar sensor.