Garmin TracPak GPS 30/30 SL Manual page 33

<2> Rom checksum test, P = pass, F = fail
<3> Receiver failure discrete, P = pass, F = fail
<4> Stored data lost, R = retained, L = lost
<5> Real time clock lost, R = retained, L = lost
<6> Oscillator drift discrete, P = pass, F = excessive
drift detected
<7> Data collection discrete, C = collecting almanac
data, null if not collecting almanac data
<8> Unit temperature in degrees C
<9> GPS 30 SL only: Configuration data, R =
retained, L = lost
4.2.11 Geographic Position with LORAN Talker ID
(LCGLL)
The LCGLL sentence reports position information
$LCGLL,<1>,<2>,<3>,<4>,<5>,<CR><LF>
<1> Latitude, ddmm.mm format (leading zeros will
be transmitted)
<2> Latitude hemisphere, N or S
<3> Longitude, dddmm.mm format (leading zeros will
be transmitted)
<4> Longitude hemisphere, E or W
<5> UTC time of position fix, hhmmss format
4.2.12 Track Made Good and Ground Speed with
LORAN Talker ID (LCVTG)
The LCVTG sentence reports track and velocity
information.
$LCVTG,<1>,T,<2>,M,<3>,N,<4>,K<CR><LF>
<1> True course over ground, 000 to 359 degrees
(leading zeros will be transmitted)
<2> Magnetic course over ground, 000 to 359
degrees (leading zeros will be transmitted)
<3> Speed over ground, 00.0 to 99.9 knots (leading
zeros will be transmitted)
<4> Speed over ground, 00.0 to 99.9 kilometers per
hour (leading zeros will be transmitted)
28