Advertisement
3. Remove existing Slim Line Doorbell Camera from existing wallplate by loosening the bottom set screw.
4. Keep the wallplate installed, verifying that the wiring is connected well to the two screw terminals and ensuring that
the bottom set screw is loosened sufficiently to not be protruding at all above the threads at the bottom of the
wallplate.
5. Secure the ADC-VDB750 device to the ADC-VDB750 Backplate Adapter and secure at the bottom of the adapter
https://answers.alarm.com/Partner/Installation_and_Troubleshooting/Video_Devices/Alarm.com_Video_Doorbell_(ADC-VDB7...
Updated: Thu, 08 Jun 2023 16:11:26 GMT
9
Advertisement
Need help?
Do you have a question about the ADC-VDB750 and is the answer not in the manual?
Questions and answers