AEG SR 4371 BT Instruction Manual page 48

English
48
Listening to the Radio
1. Fully extend the telescopic antenna. If necessary, change
the position for a better reception.
2. Select the radio mode with the FUNCTION button (11).
"TUNER" will appear in the display.
3. You have two possibilities to look for and store radio
stations.
• Automatic station scan:
Important! Any previously stored radio stations will
be overwritten.
Press and hold the
seconds. The device is searching the complete FM
frequency band for radio stations. The stations found
are stored ascending by frequency.
• Searching for radio stations manually:
Turn the TUNING control (10) until you have found
the radio station that you are looking for.
Storing stations:
1. Search for the desired radio station with the
TUNING control (10).
2. In order to store the radio station, press the
MEM/PROG./P-MODE button (19). The notifica-
tion "P 01" will blink in the display and "MEM" is
shown.
3. Use the / buttons (8) to select the desired
memory location.
4. Press the MEM/PROG./P-MODE button. The
radio station will be stored.
NOTE:
If there is noise from the station received, we recommend
that you switch to MONO. Press the MO/ST button (3 on
the remote control) to select MONO or STEREO.
Selecting stored radio stations
The stored radio stations can be selected by repeatedly
pressing the 10/FOLD/M
Playing CDs/MP3
1. Select the CD mode with the FUNCTION button (11).
The following will appear in the display "CD".
2. Open the CD tray (6) by pressing the PUSH TO OPEN
button (7).
3. Insert an audio CD with the printed side facing upwards
on to the central cone so that the CD clicks into place
and then close the lid of the CD compartment.
4. The total number of tracks and the playing duration will
be shown in the display after a few seconds.
NOTE:
The number of folders and the total number of tracks
will be shown with CDs in the MP3 format.
/ button (9) for approx. 3
buttons.
5. The CD will play from the first title. The elapsed playing
time and the current track will be shown in the display.
If available, the ID3 tag Meta data will additionally alter-
nately be shown as a continuous band with CDs in the
MP3 format.
6. In order to remove a CD, please press the button (12),
open the CD compartment and lift the CD out carefully.
Always keep the CD deck closed.
NOTE:
• If a disc is inserted the wrong way around, respectively
if no disc is inserted, then the message "READING" will
blink and "NO DISC" appears on the display.
• Playback of CDs produced by the user cannot be
guaranteed due to the large variety of software and CD
media available.
Playing back music via Bluetooth
Bluetooth involves a technology for wireless radio connec-
tion of devices over a short distance. Devices with Bluetooth
standard are transmitting between 2.402 and 2.480 GHz in
the ISM band (Industrial, Scientific and Medical). Interference
can be caused for example by WLAN-networks, DAB radios,
cordless phones, or microwave ovens which work on the
same frequency band.
This device offers you the possibility to use a Bluetooth-en-
abled device. The functional radius is limited to approx. 15
metres depending on the surroundings and the unit used.
If your playing device supports the A2DP profile (Advanced
Audio Distribution Profile) and has a music-player function,
then you can also wirelessly transfer music to the device. The
A2DP profile involves a multi-vendor Bluetooth profile. By
streaming, stereo-audio signals are wirelessly transferred be-
tween the playing device (source) and the receiving device.
To be able to remotely control the source, the playback de-
vice must support the AVRCP profile (Audio Video Remote
Control Profile).
Due to the different device manufacturers, models, and
software versions, a full functionality cannot be guaranteed.
Logging on devices (Pairing)
Before you listen to music via the unit, you must pair the
devices.
1. Ensure, that the Bluetooth function is activated in your
player (e.g. mobile phone). For this, refer to the operation
manual of your player.
2. Select the BLUETOOTH mode using the FUNCTION
button (11). The control lamp PAIR will blink blue. Shortly
after that, the device will beep two times. This signalizes
that the device is in pairing mode.
3. Choose the Bluetooth menu in your player and register
the device in your player. For this, refer to the operation