IBC MVE2 Series Quick Start Manual

MVE2xx
Globe Valves Actuators
FORCE
MODEL
[N]
MVE204 400
MVE206 600
230 V AC
MVE210 1000
MVE215 1500
MVE222 2200
MVE204S 400
MVE206S 600
230 V AC
MVE210S 1000
MVE215S 1500
MVE222S 2200
APPLICATION AND USE
MVE2xx is a flexible electro-mechanical actuator for the control of two and three way globe valves in:
• heating and cooling systems
• Air Handling Units
• district heating plants
• industrial temperature control systems.
MVE2xx can be controlled either by a proportional (modulating) signal or by an increase/decrease (Floating) signal.
It is easy to mount and connect the actuator. Direct mounting is possible to any iSMA CONTROLLI flanged valve. Linkage kits are avai-
lable for iSMA CONTROLLI threaded valves as well as for valves of other manufacturers (table page 3).
The actuator has a fine resolution (500 steps on the full stroke range) for exacting fluid control and it is able to self-calibrate on a
different stroke without the need of any user action (this function is DIP switch selectable on the field).
MVE2xx has intelligent behaviour and alarm functionality in case of unexpected operation, feedback of alarms to the user is provided
by LEDs (GREEN and RED) on the control board.
N.B.: Do not use the actuator if not coupled with its relating valve.
TECHNICAL CHARACTERISTICS
DESCRIZIONE
Supply voltage F N
Power consumption (running)
Power consumption (holding)
Modulating
Running
time
Increase/decrease
Stroke
Force
Duty cycle
Analogue input Y M
Digital inputs Y1 Y2
Output V+
The performances stated in this sheet can be modifi ed without any prior notice.
DISTRIBUTION PARTNER:
POWER
DESCRIPTION
SUPPLY
Long yoke, modulating/
±10% floating control
Short yoke, modula-
±10% ting/floating control
MVE204
MVE204S
10 VA/4,5 W
8 VA/4 W
15 s (for valves with stroke from 5 to 15 mm)
20 s (for valves with stroke from 15 to 25 mm)
30 s (for valves with stroke from 25 to 60 mm)
400 N
Voltage 0-10 V - impedance > 100 kΩ (range: 0-10 V DC, 2-10 V DC, 0-5/2-6 V DC, 5-10/6-10 V DC)
www.ismacontrolli.com
sales@ibc.ie (ROI/INTL.)
bill@ibc.ie (NI/UK)
MVE206 MVE210
MVE206S MVE210S
230 V AC ±10%, 50-60 Hz
13 VA/6 W 18 VA/8 W
11 VA/5 W 11 VA/5 W
60 s
5-60 mm (limited to 30 mm for MVE.S)
600 N 1000 N
max 50%/60 minutes
500 Ω (range 4-20 mA)
Connection of Y1, Y2 to M
Voltage 16 V DC ± 0,5 V, max load 25 mA,
DBL394en | 1
MVE215
MVE215S MVE222S
21 VA/11 W 25 VA/10 W
13 VA/7 W 10 VA/4 W
(for valves with
stroke from 5 to
1500 N
Issue rev. 8 | 07/2022
st
MVE222
60 s
60 mm)
2200 N
page 1