Table of Contents
Advertisement
Quick Links
LB management
Universal blinds insert
Universal blinds insert
Art. no.: 1731JE
Operating instructions
1
Safety instructions
Electrical devices may only be mounted and connected by electrically skilled persons.
Serious injuries, fire or property damage possible. Please read and follow manual fully.
Danger of electric shock. Always disconnect before carrying out work on the device or load. In
so doing, take all the circuit breakers into account, which support dangerous voltages to the
device and or load.
Danger of electric shock. Do not mount the device on unearthed, electrically conductive sub-
strates or let it come into contact with them.
Risk of injury. Use the device only for controlling Venetian blind and roller shutter motors or
awnings. Do not use it to switch other loads.
For parallel connection of several motors to an output it is essential to observe the correspond-
ing instructions of the manufacturers, and to use a cut-off relay if necessary. The motors may be
destroyed.
Use only venetian blind motors with mechanical or electronic limit switches. Check the limit
switches for correct adjustment. Observe the specifications of the motor manufacturers. Device
can be damaged.
Danger of electric shock. Damaged covers may no longer be operated. Disconnect the device
immediately.
These instructions are an integral part of the product, and must remain with the end customer.
2
Device components
(1)
Venetian blind insert
(2)
Frame
(3)
Cover
(4)
Terminals
(5)
Button TEST
82595623
J0082595623
Figure 1: Device components
1 / 6
28.01.2020
Advertisement
Table of Contents
Related Manuals for Jung 1731JE
Summary of Contents for Jung 1731JE
- Page 1 LB management Universal blinds insert Universal blinds insert Art. no.: 1731JE Operating instructions Safety instructions Electrical devices may only be mounted and connected by electrically skilled persons. Serious injuries, fire or property damage possible. Please read and follow manual fully.
- Page 2 LB management Universal blinds insert Intended use – Controlling electrically driven blinds, rolling shutters and awnings – Automatic time controller using the cover or extension inputs – Operation only with suitable cover from LB management – Mounting in appliance box according to DIN 49073 Product characteristics –...
- Page 3 LB management Universal blinds insert Connecting and mounting venetian blind insert Figure 2: Control with extension Figure 3: Terminal-specific cable cross-section: ￭ Connecting venetian blind insert (1) (Figure 2). Note clampable cable cross-sections (Figure 3). Optional: Connection of an extension (6). A mechanical venetian blind push- button or venetian blind switch can also be used as an extension instead of the venetian blind insert.
- Page 4 LB management Universal blinds insert Integrating the device into a group control The venetian blind insert can be integrated into a group control (Figure 4), either for local control (1) or as a master unit (7). Figure 4: Connection example of group control ￭...
- Page 5 LB management Universal blinds insert Implementing a wind alarm Wind sensors serve to protect a Venetian blind from being destroyed by a strong wind. The Venetian blind is moved to a safe end position and locked there until the wind drops below the set threshold value.
- Page 6 LB management Universal blinds insert ALBRECHT JUNG GMBH & CO. KG Volmestraße 1 58579 Schalksmühle GERMANY Telefon: +49 2355 806-0 Telefax: +49 2355 806-204 kundencenter@jung.de www.jung.de 82595623 28.01.2020 6 / 6 J0082595623...
Need help?
Do you have a question about the 1731JE and is the answer not in the manual?
Questions and answers