GMC Express 2011 Owner's Manual page 203

Digit Dial: This command allows a
phone number to be dialed by
entering the digits one at a time.
Re dial: This command is used to
dial the last number used on the
cell phone.
Using the Dial or
Call Command
1. Press and hold /
two seconds.
2. Say Dial or Call.
3. Say the entire number without
pausing, or say the name tag.
Once connected, the person called
will be heard through the audio
speakers.
Using the Digit Dial Command
The digit dial command allows a
phone number to be dialed by
entering the digits one at a time.
After each digit is entered, the
system repeats back the digit it
heard followed by a tone.
If an unwanted number is
recognized by the system, say
Clear at any time to clear the
last number.
To hear all of the numbers
recognized by the system, say
Verify at any time.
1. Press and hold
two seconds.
for
2. Say Digit Dial.
3. Say each digit, one at a time,
that you want to dial. After each
digit is entered, the system
repeats back the digit it heard
followed by a tone. After the
last digit has been entered,
say Dial.
Once connected, the person called
will be heard through the audio
speakers.
Infotainment System
Using the Re dial Command
1. Press and hold
two seconds.
2. After the tone, say Re dial.
Once connected, the person called
will be heard through the audio
speakers.
/ for
Receiving a Call
When an incoming call is received,
the audio system mutes and a ring
tone is heard in the vehicle.
Press
Press
7-29
/ for
/ to answer the call.
/ to ignore a call.