Brave MBRPG5500B.2 Owner's Manual page 9

Machine Component Identification
Items: BRPG5500, BRPG8000, BRPG8000ES
Reference 1 – Recoil
Reference 2 – Fuel Valve Lever
Reference 3 – Engine Key Switch
Reference 4 – Vibration Isolation
Mount
Reference 5 – Oil Drain Plug
Reference 6 – Oil Fill Port
Reference 7 – Battery (not included)
Reference 8 – Control Panel
Reference 9 – Generator Head
Reference 10 – 6.5 Gallon Gas Tank
Reference 11 – Muffler
Reference 12 – Gasoline Tank Cap
Reference 13 – Carbon Canister
Reference 14 – Air Cleaner
Reference 15 – Choke Lever
REFERENCE GUIDE
Grasp firmly when starting engine.
The Honda engine has an ON-OFF valve. Always
keep this valve closed when the generator is not in
use. Always keep this valve closed while
transporting the generator.
The engine key switch is located on the control
panel. Always locate this switch and be familiar
with its location before operating the generator.
The engine and generator are mounted on rubber
cylinders that absorb most of the engine vibration.
This feature eliminates the tendency of the machine
to "walk" which is common in engine-powered
equipment.
Refer to your Honda engine manual for oil change
recommendations.
Refer to your Honda engine manual for oil change
recommendations.
Type required: 12VDC. 18AH
An electrical device that contains outlets and
meters for controlling other electrical devices
The electricity producing part of the generator.
Large tank allows for extended run capabilities.
Always allow room for gasoline expansion by not
filling the gas tank completely full.
An acoustic device installed onto the exhaust
system that is designed to reduce noise.
The gasoline tank cap is extra-large, creating a
large hole for refilling and a comfortable grip.
Prevents gasoline vapors from exiting the fuel
system.
Refer to your Honda engine manual for air cleaner
care.
Used during cold starts. Refer to the Honda engine
manual for usage.
9