Troubleshooting - Pentair Pool Products IntelliChlor IC40 Installation Manual

Troubleshooting

Note: Turn off power to unit before attempting to service or repair
Problem
The IntelliChlor green
power light on the
control panel is not on.
Possible Cause
Fuse in Power Center is open.
No AC power to Power Center.
Transformer leads not wired correctly in Power
Center.
Corrective Action
Replace 10 AMP (3AG Style) fuse, located at
bottom of Power Center.
Verify time clock is providing 110 VAC or 220
VAC to Power Center when active.
Verify transformer leads wired to AC source by
referring to wiring diagram decal on inside of
Power Center cover.
IntelliChlor Power Center Installation Guide
5