Replacing the I/O board
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your
computer, follow the instructions in
computer. For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.
Procedure
1
Slide the I/O-board cable into the I/O-board cable connector and press
down on the latch to secure the cable.
2
Turn over the I/O board and align the screw hole on the I/O board with
the screw hole on the palm-rest assembly.
3
Replace the screw that secures the I/O board to the palm-rest assembly.
Post-requisites
1
Follow the procedure from step 3 to step 8 in
base".
2
Replace the keyboard.
3
Replace the
wireless
4
Replace the
hard
5
Replace the
base
6
Replace the
optical
7
Replace the battery.
computer. After working inside your
card.
drive.
cover.
drive.
After working inside your
"Replacing the computer
55