Table of Contents
Advertisement
Problem
My RioVolt gives a
"No Disc" error
P
message when
spinning up.
I can't play my WMA
files.
Solution
To resolve the "No Disc" error message, try the following:
• Make sure the CD is seated properly in the tray.
• See if a standard Audio CD functions properly.
• Try a CD created with standard MP3 files encoded at 128kbps, NOT variable
bitrate (VBR) files.
• Try burning to a different media or brand of media.
• Try burning a CD from another CD burner.
• See if burning at a slower rate (say 2x or slower) makes the files load properly.
• Try closing the CD volume when you create the disc.
• Try cleaning the lens with a cotton swab.
• If you are using a Macintosh to burn your CDs, make sure the .mp3 extension
is at the end of each file. Some versions of Mac software do not include this
extension, and these files cannot be read by the RioVolt.
The RioVolt SP60 cannot read WMA files. Please try the following:
• Convert your WMA files into MP3 files using your music software.
• Rip and burn the songs in MP3 format to a new CD.
Troubleshooting
17
Contents
Index
Advertisement
Table of Contents
