Table of Contents
Advertisement
Troubleshooting
Problem
I am only able to fit
P
10-15 songs on a CD-
R or CD-RW for my
RioVolt.
After creating a CD
using DirectCD the
RioVolt will not read it
properly.
I am unable to power
up the RioVolt. This
happens when using
new batteries or an
AC power adapter
(not included).
The RioVolt is
working with
batteries, but when I
plug in an AC adapter
(not included) it does
not work.
Solution
If you are only able to fit 10-15 songs on a CD-R or CD-RW for use in your
RioVolt, then it is likely you are creating the CD in audio or.wav format instead of
data format. You should be able to fit hundreds of tracks onto one CD. Consult
the documentation that came with your burning software for further assistance
with this.
If the RioVolt is having trouble reading a CD created using DirectCD, make sure
that the CD is formatted with compression OFF. If compression is ON, the RioVolt
will not read the tracks properly. Check the documentation that came with your
burning software for further assistance with this.
Be sure that the LOCK/UNLOCK switch on the RioVolt is set to UNLOCK. If the
LOCK/UNLOCK switch is in the LOCK position, you will be unable to power up the
unit. Place the LOCK/UNLOCK Switch to the UNLOCK position and press the PLAY/
PAUSE button to power up the RioVolt.
Be sure that the AC Adapter is plugged into the proper connection. You may be
plugging the AC Adapter into the Line-out connector on the RioVolt. If you are still
experiencing problems, be sure the LOCK/UNLOCK switch on RioVolt is set to
UNLOCK.
Troubleshooting
Contents
Index
17
Advertisement
Table of Contents
