Related Manuals for Peraqua OCEAN Skimmer deluxe
Summary of Contents for Peraqua OCEAN Skimmer deluxe
- Page 1 OPERATION MANUAL SKIMMER deluxe Suitable for private, hotel and public pools AVAILABLE IN WHITE, GREY AND BLACK In PT and M5 design, with or without glued sealing...
- Page 2 DIMENSIONS AND CONNECTIONS EXPLANATION OF THE SKIMMER CONNECTIONS A) PUMP CONNECTION Possibilities to connect to the circulation pump: metric glued connection ( d63 mm spigot, d50 mm socket) connection always open 2“ BSP internal to punch out CAUTION Do not seal inner thread 2“ with hemp! NOTICE It‘s recommended to seal the thread with PTFE thread with gasket strips! B) OVERFLOW CONNECTION...
- Page 3 INSTALLATION INSTRUCTION Glue protective installation foil onto the steel wall. Drill holes according to one of the two patterns and cut skimmer opening out of wall (for ex- ample: compass saw, snips,..) After having cut out the skimmer opening, remove protection foil. CAUTION Dabur sharp edges after cutting! NOTICE...
- Page 4 Picture 1 Detail Picture Picture 2 ACHTUNG INSTALLATION ADVICE FOR GLUED SEALING Please see as above but use seal for glueing instead of lip seal. Please note that for 170936 and 170937 only seal for glueing comes together with the set. In case of 2 are needed please order another sealing with Prod. No. 51317. SKIMMER FOR CONCRETE POOL INSTALLATION INSTRUCTION Bring skimmer to desired position (extension ring if necessary).
- Page 5 NOTICE Take care about pressure and distortion especially in the area of the skimmer opening, so that the skimmer weir is alwasy moving! Chemical resistance data are only to be used as a guideline, as changes in the composition of the medium (i.
- Page 6 SKIMMER PARTS...
- Page 7 SKIMMER WEIR Installation of foam into the skimmer. Insert foam into skimmer weir INSTALLATION OF WEIR Insert spring loaded weir hinge pins into skimmer body (Detail X) Push the other end of the weir down wards until the pin snaps into place.
- Page 8 CONNECTION OF A POOL CLEANER Take skimmer lid off. Fill hose with water. Connect hose to vacuum plate. Put vacuum plate on to basket (see above). Remove end cap from skimmer after cleaning the pump. Clean basket. Insert basket and push handle back. Put lid back on skimmer.
- Page 9 HEADOFFICE/EXPORT AUSTRIA +43 7435 58488-0 info@peraqua.com www.peraqua.com SERVICE/LOGISTICS +49 9171 9677 1200 office.de@peraplas.com +420 323 63 76-73 office.cz@peraplas.com...