Advertisement
4. . Connect and charge
WARNING
•
Use only the approved rechargeable Ni-MH battery cells (2 x AAA Ni-MH
rechargeable batteries) supplied with your PIP12 TRAVEL.
•
Strangulation Hazard. Children have STRANGLED in cords. Keep adaptor
cords out of the reach of children (more than 1 metre away). Never use
extension cords with AC adaptors. Only use the AC adaptors provided.
Note: When charging the batteries for the first time, charge for at least 16
hours continuously. After charging for the first time, subsequent charging time
is about 8 to 10 hours a day. Fully charged batteries should give up to 10 hours
use time.
Baby unit
Install batteries
1.
Lift up the battery cover to remove it from the baby unit.
2. Insert the rechargeable Ni-MH battery cells supplied. Note the '+' and
'-' markings beside the battery compartment and insert in the correct
direction.
3. Place the battery cover back into place.
Connect the baby unit
1.
Plug the DC plug of the power adaptor into the DC jack on the side of the
baby unit and plug the other end of the AC adaptor into the AC power outlet.
2. Switch on the AC power (if your AC power outlet has a switch). The battery
charging LED indicator lights up in red and turns dim until the batteries are
fully charged.
Note: If the battery charging LED indicator flashes red when turning on the
power button, it means the battery level is low and needs recharging.
7
Advertisement
