Advertisement
Indicator
Name
Road
Departure
Mitigation
(RDM)
Indicator
*
*1:Models with the smart entry system have an ENGINE START/STOP button instead of an ignition switch.
* Not available on all models
On/Blinking
Comes on for a few seconds when
●
you turn the ignition switch to ON
(
w
*1
, then goes off.
Comes on if there is a problem
●
with the RDM system.
Comes on when the RDM system
●
shuts itself off.
Comes on if anything covers the
●
radar sensor cover and prevents
the sensor from detecting a vehicle
in front.
May come on when driving in bad
●
weather (rain, snow, fog, etc.)
Explanation
Stays on constantly - Have your vehicle
●
checked by a dealer.
Stays on - The temperature inside the
●
camera is too high.
Use the climate control system to cool
down the camera.
The system activates when the temperature
inside the camera cools down.
2 Front Sensor Camera P. 494
Stays on - The area around the camera is
●
blocked by dirt, mud, etc. Stop your
vehicle in a safe place, and wipe it off
with a soft cloth.
Have your vehicle checked by a dealer if the
●
indicator and message come back on after
you cleaned the area around the camera.
2 Front Sensor Camera P. 494
When the radar sensor gets dirty, stop
●
your vehicle in a safe place, and wipe off
dirt using a soft cloth.
Have your vehicle checked by a dealer if
●
the indicator does not go off even after
you clean the sensor cover.
uuIndicatorsu
Message
*
Continued
95
Advertisement
