USB Port(s)
*
*1 : Models with the smart entry system have an ENGINE START/STOP button instead of an ignition switch.
* Not available on all models
1. Open the cover.
2. Install the iPod USB connector or the USB
*
flash drive to the USB port.
u
The USB port (1.0A) is for playing audio
files on a USB flash drive, connecting a
cellular phone and charging devices.
u
The USB port (1.5 A)
devices, playing audio files and
connecting compatible phones with
Apple CarPlay
TM
or Android Auto
1USB Port(s)
•
Do not leave the iPod or USB flash drive in the
vehicle. Direct sunlight and high temperatures may
damage it.
•
We recommend using an extension cable with the
USB port.
•
Do not connect the iPod or USB flash drive using a
hub.
*
is for charging
•
Do not use a device such as a card reader or hard
disk drive, as the device or your files may be
damaged.
•
We recommend your data backed up before using
TM
.
the device in your vehicle.
•
Displayed messages may vary depending on the
device model and software version.
If the audio system does not recognize the iPod, try
reconnecting it a few times or reboot the device. To
reboot, follow the manufacturer's instructions
provided with the iPod or visit www.apple.com/ipod.
USB charge
The USB port can supply up to 1.0A/1.5A
It does not output 1.0A/1.5A unless the device
requests. For amperage details, read the operating
manual of the device that needs to be charged .
Turn the ignition switch to ACCESSORY
*1
first.
(
w
Under certain conditions, a device connected to the
port may generate noise in the radio you are listening
to.
uuAudio SystemuUSB Port(s)
*
of power.
or ON
(
q
225