Advertisement
NOTE: Refer to the user manual of your Bluetooth enabled device for instructions on pairing and
connecting Bluetooth devices.
1. Keep the unit and your Bluetooth enabled device within 1 metre at all times during the pairing
process.
2. Turn on the unit and toggle to the Bluetooth mode with the Blue LED indicator light on the front
panel. It will be flashing indicating the unit is in pairing mode.
3. Turn on the Bluetooth function on your Bluetooth enabled device and search for Bluetooth devices.
When the search is complete, select "BTSB370" from the Bluetooth device list.
4. When the Bluetooth connection is successful, you will hear a confirmation tone that the unit and
your device are connected.
NOTE:
•
If pairing was unsuccessful, turn off the unit first and repeat the steps above to re-pair again.
•
After successful pairing, paired devices will remember each other. Unless pairing information is
deleted, re-pairing is not required after the first time.
5. Once you are successfully connected, you can use the controls located on the side of the unit, the
controls on your Bluetooth device and or the controls on the remote control.
6. To increase or decrease the volume, adjust the volume control on the unit and your device.
7. To skip songs forward or backward, press the Next or Previous buttons on the unit, remote control
or on your device.
8. To pause and resume playback, press the Play/Pause Button anytime during playback on the front
of the unit on the unit, remote control or your device.
Requires an optical audio cable (not included) and a TV or other audio output device with optical output
(not included).
1. Connect one end of the optical audio cable to the TV and the other end to the Optical Digital Input
located on the back side of the soundbar.
2. Press the Mode Button and toggle to the optical input mode with the Green LED indicator light on
the front panel.
3. Use the controls on the TV, soundbar and or remote control to the desired volume level.
1. Using the 3.5mm audio (aux-in / line in) cable provided, connect one end of the cable to the Aux-in /
Line in Jack located on the back side of the soundbar. Plug the other end into a TV, smartphone,
tablet, MP3 player or other audio source with 3.5mm output.
2. Press the Mode Button and toggle to the aux-in / line in mode with the white LED indicator light on
the front panel.
3. Use the native controls on the connected device to play, pause and control the music output.
This Soundbar allows you to play music from a USB thumb drive with MP3 formatted files. Insert the USB
thumb drive on the back side of the soundbar. Press the Mode Button to cycle through to the USB Mode
with the pink LED indicator light on the front panel. Use the controls on the soundbar or the remote control
to play, pause and control the music output.
BLUETOOTH MODE
OPTICAL INPUT MODE
AUDIO INPUT (AUX-IN / LINE IN) MODE
USB MODE
E-6
Advertisement
