Advertisement
The front panel of the soundbar has a LED
indicator light that shows which status the
soundbar is in.
Please refer to the chart.
Using the AC adapter provided, plug the smaller end into the DC Power Jack located on the back side of
the soundbar and plug the other end into the AC wall socket / outlet.
The remote control includes a battery. Pull the plastic protective tab on the back side of the remote control
before use. To change the battery on the remote control, pull the battery compartment out on the bottom of
the remote control and replace it with a CR2025 3V battery.
Battery Disposal
This remote control contains a lithium cell (battery) and should not be disposed of in normal household
waste. For disposal and recycling, please contact your local waste management authorities. The recycling
and processing of electronic waste will make a significant contribution towards helping protect the
environment.
Warning: To reduce the risk of fire and burns, do not disassemble, crush, puncture, short external contacts
or dispose of in fire or water.
This soundbar has 4 play modes: Bluetooth, Optical, USB and Aux-in / Line in.
Using the controls located on the side of the soundbar, press and hold the Power / Mode Button to turn it
on. Press the Power / Mode Button again to toggle between the various play modes. Each play mode will
have a different colour LED indicator light illuminated on the front panel of the unit as noted above.
Press and hold the Power / Mode Button to turn off the unit.
The remote control has separate buttons for Power and Mode. Simply press the Power Button on the
remote control to turn on / off the soundbar and use the Mode Button to toggle through the various play
modes.
LED STATUS LIGHT
RED
Standby (OFF)
BLUE
Bluetooth Mode
GREEN
Optical Digital Audio Input Mode
WHITE
Aux-in / Line in Mode
PINK
USB Mode
POWER
BASIC OPERATION
E-5
Advertisement
