Page 1
Model No. Lithium 40v Battery Charging Base (LFV-CB) LITHIUM ION BATTERY CHARGER Model No. Lithium 40v Battery Charging Base (LFV-CB) OWNER’S MANUAL READ ALL SAFETY RULES AND INSTRUCTIONS CAREFULLY BEFORE OPERATING...
PRODUCT SPECIFICATIONS COMPONENTS • StrikeMaster 40v Lithium Battery Charging Base is compatible with the Lithium 40v 5 amp(LFV-B) • Input: 120v AC 50/60Hz 1.5A • Output: 40v DC 2.2A • Weight: 1.48 lbs., (0.67 kg) REGISTER YOUR PRODUCT ONLINE TO ACTIVATE YOUR WARRANTY www.rapala.com/content/rapala-brand-warranties/strikemaster-warranty.html...
Page 3
GENERAL POWER TOOL SAFETY WARNINGS 4) POWER TOOL USE AND CARE A) Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed. W A R N I N G B) Do not use the power tool if the switch does not turn it on and off.
SYMBOLS KNOW YOU CHARGING BASE The following signal words and meanings are intended to explain the levels of risk associated with this product. The safe use of this product requires an understanding of the information on the product and in this owner’s manual as well as a knowledge of the project you are attempting.
OPERATION OPERATION CHARGING PROCEDURE CHARGING BASE MOUNTING NOTE: The Battery Pack is not shipped fully charged. It is recommended to fully charge before first use to ensure 1. This Charging Base can be installed hanging on a wall using two screws (not included) that maximum run time can be achieved.
StrikeMaster, at its own discretion will repair or replace any and all parts When servicing, use only identical StrikeMaster replacement parts. Use of any other parts may create a hazard or found to be defective, through normal use, free of charge to the customer. This warranty...