Related Manuals for Xterra ERG550W
Summary of Contents for Xterra ERG550W
- Page 1 ERG550W WATER ROWING MACHINE OWNER’S MANUAL PLEASE CAREFULLY READ THIS ENTIRE MANUAL BEFORE OPERATING YOUR NEW ROWER...
- Page 2 XTERRA Fitness will do all we can to make your ownership experience as pleasant as possible for many years to come. If you have questions, or if parts are missing or damaged, or you require customer service, call (870) 333-5500.
- Page 3 Serial Number Register Your Purchase The self-addressed product registration card must be completed in full and returned to XTERRA Fitness. You can also go to www.xterrafitness.com/warranty to register on- line. ATTENTION THIS ROWER IS INTENDED FOR RESIDENTIAL USE ONLY AND IS WARRANTED FOR THE APPLICATION.
- Page 4 Failure to follow all guidelines may compromise the effectiveness of the exercise experience, expose yourself (and possibly others) to injury, and reduce the longevity of the equipment. SAVE THESE INSTRUCTIONS - THINK SAFETY! CAUTION!! Please be careful when unpacking the carton. ERG550W Rower...
- Page 5 Machine provides an impressive selection of features designed to make your workouts at home more effective and enjoyable. For your benefit, read this manual carefully before you use the ERG550W Water Rowing Machine. To help us assist you, note the product model number and serial number before contacting us. Before reading further, please familiarize yourself with the parts that are labeled in the drawing below.
- Page 6 ERG550W Assembly Part Checklist NO.3 NO.54 NO.17 NO.90 NO.1 NO.83 、 NO.91 NO.2 NO.4 ERG550W Rower...
- Page 7 ERG550W Assembly Part Checklist Part No Description Q’ty Main Frame Front Stabilizer Console Seat Funnel Front Stabilizer Slide Rail Pedal Plate L Pedal Plate R Siphon Pump User Manual Hardware Parts Note: Above parts are all needed to assemble this machine. Before you start to assemble, please check the hardware packing to make sure they are included.
- Page 8 ERG550W Assembly Pack Checklist Hardware Package Step 1 (#99) Curved (#80) Hex (#67) Hex Socket Round (#27) Flat (#73) Hex Socket Round Head Screw M8*95 2pcs Washer 4pcs Nut M8 2pcs Head Screw M8*15 2pcs Washer 2pcs Step 2 (#65) Hex Socket...
- Page 9 ERG550W Assembly Instructions Front Stabilizer NOTE: We recommend having 2 people to assemble the product. Please be careful when assembling Step 1. The Main Frame is easy to topple. 1. Attach the Front Stabilizer (No.4) onto the Main Frame (No.1) with 4 Curved Washers (No.99) and 2 Hex Socket Round Head Screws (No.73) and 2 Nylon...
- Page 10 3. Secure the Limit Pad (No.40) with 2 Hex Socket Screws (No.65). Then attach the Rear Stabilizer (No.3) to the Slide Rail (No.2) with 4 Flat Washers (No.27) and 4 Hex Bolts (No.62). 4. Tighten with Allen Wrench with Phillips Screwdriver (No.96) and the Open Wrench (No.97) . ERG550W Rower...
- Page 11 Seat Stop 1. Attach the Stop Brackets L / R (No.111 / 112) to the Sliding Rail (No.2) and tighten the caps with 2 Self-tapping screws (No.101). 2. Tighten using the Allen Wrench with Phillips Screwdriver (No.96) provided. ERG550W Rower...
- Page 12 1. Attach the Slide Rail (No.2) to the Main Frame (No.1) using 4 Flat Washers (No.74), 4 Hex Socket Round Hex Screws (No.67) and 4 Hex Socket Screws (No.66). Insert all 8 screws partially into the holes first, and then tighten using the Allen Wrench with Phillips Screwdriver (No.96). ERG550W Rower...
- Page 13 Pedals 1. Screw the Pedal Plate L (No.83) into the Main Frame (No.1) with 2 Hex Bolts (No.114) using the Open Wrench (No.97). Tighten. 2. Repeat for Pedal Plate R (No.104) to Main Frame (No.1). ERG550W Rower...
- Page 14 (No.54) onto the Main Frame (No.1) with 1 Hex Socket Round Head Screw (No.51), 1 Flat Washer (No.74) and 1 Nylon Hex Nut (No.80). 3. Tighten using the Allen Wrench with Phillips Screwdriver (No.96) and Open Wrench (No.97) provided. ERG550W Rower...
- Page 15 Filling the tank over this limit will void the warranty. • The resistance depends on the water level in the tank. Water level 1 is the lowest resistance. Level 6 is the highest resistance. Fig. B Fig. A Water level label ERG550W Rower...
- Page 16 Adjust the Adjustable Floor Stabilizers (No.19) below the Rear Stabilizer (No.3) of the machine if the machine is unbalanced during use. CAUTION! Moving parts, such as the seat, can crush and cut. Keep hands clear of the Slide Rail during use. ERG550W Rower...
- Page 17 When not in use, you can save space by storing the rower vertically. Lift by the Rear Stabilizer (No.3) to raise the rower to vertical position. If not using the rower for more than a month, empty the tank before storing. ERG550W Rower...
- Page 18 Operation of Your Console ERG550W Console RESET ENTER Our computerized display console on the Water Rowing Machine allows the user to tailor a personalized workout by monitoring their progress. During a workout, the display console will alternately and repeatedly display the Time, Time/500M, SPM, Distance, Strokes, Total Strokes, Calories Burned and Pulse (all of the above).
- Page 19 PULSE will blink until target range is resumed or wireless chest strap sensor is removed. The pulse measurement function is only usable with the optional wireless chest strap sensor. WATT: Current workout watts with available range from 0 up to 999. ERG550W Rower...
- Page 20 WATER LEVEL (LOAD) Fig.3 Fig.4 The menu at the top of the screen will blink to have you choose between MANUAL & RACE mode. Press UP or DOWN to select, then press ENTER and confirm your desired workout mode. ERG550W Rower...
- Page 21 Press ENTER and the picture of the race will display on the screen. The TIME/500M of the programs are as follows: L12 L13 L14 L15 8:00 7:30 7:00 6:30 6:00 5:30 5:00 4:30 4:00 3:30 3:00 2:30 2:00 1:30 1:00 Fig. 8 Fig. 7 ERG550W Rower...
- Page 22 Then the matrix displays “PC WIN” or “USER WIN” (Fig.10). When the race is over, you can press START to start a race once again. Press RESET to leave the RACE screen. ERG550W Rower...
- Page 23 7. Start training, pressing the pause button at the top of the screen to stop. 8. From the pause screen you can continue the workout or exit to end the workout. NOTE: This machine is compatible with other 3rd party fitness apps using FTMS protocol. ERG550W Rower...
- Page 24 Sensor wire not connected are connected properly at the upright and the computer No count or distance Sensor wire not working Replace sensor wire displays on the monitor properly Monitor not working properly Replace monitor Squealing Belt slipping Adjust Belt ERG550W Rower...
- Page 25 Effective January 1, 2023 - ROWER LIMITED WARRANTY XTERRA Fitness Inc. warrants all its home use Rower parts for a period of time listed below, from the date of retail sale, as determined by a sales receipt or in the absence of a sales receipt, eighteen (18) months from the original factory shipping date. XTERRA Fitness’...
- Page 26 Exploded View ERG550W Rower...
- Page 27 Left Front Stabilizer End Cap Right Front Stabilizer End Cap Wire Bushing PVC Black Pulley Plate A Pulley Plate B HR,H2.0*65*63 Belt VEGA, PJ41" Handle Bar End Cap PP Black Handle Bar Sleeve Ф33*3*265 Braid Black Belt Wheel POM,Black ERG550W Rower...
- Page 28 Hex Socket Round Head Screw M8*15 Hex Socket Screw M4*18 Magnet OD10*2 Flange Nut Adjusting screw M6*35 Hex Socket Round Head Screw M5*15 Hex Socket Round Head Screw M8*95 Flat washer OD20*ID8.5*T1.5 Cross-head screw M5(Ф9)*35 Self-tapping screw ST4*16 Hex Bolt M6*15 ERG550W Rower...
- Page 29 Cross pan head screw M4*8Φ8 Hex Socket Round Head Screw M5*8 Hex Socket Bolt M8*125 Bushing For Handle Bar L24mm Cross-head screw M5*15 Stop Brackets L PP,Black Stop Brackets R PP,Black Hex Bolt M12*18 Self-tapping screw ST4.28*16 Hardware package ERG550W Rower...
- Page 30 ERG550W Rower...
- Page 31 ERG550W Rower...
- Page 32 3000 Nestle Road Jonesboro, AR 72401 - Phone:870-333-5500 - Fax:870-935-7611 www.xterrafitness.com ©2022 All RIghts Reserved. ERG550W Owner’s Manual...