Advertisement
■
To Disable the System
AUTO Position
*1:Models with the smart entry system have an ENGINE START/STOP button instead of an
ignition switch.
uuOperating the Switches Around the Steering WheeluAuto High-Beam (High Beam Support System)
Disable the system when the vehicle is parked
with the ignition switch in ON
light switch is in the AUTO position.
To disable the system: Pull the light switch
lever towards you and hold it for 40 seconds.
The auto high-beam indicator in the meter will
blink twice.
To enable the system: Pull the light switch
lever towards you and hold it for 30 seconds.
The auto high-beam indicator in the meter will
blink once.
1To Disable the System
The auto high-beam will remain in the selected
disabled or enabled setting each time you start the
(
w
*1
and the
engine.
*
151
Advertisement
