Fall Hazard - BABY DELIGHT Beside Me BD06040 Instructions Manual

Safety Precautions
WARNING:
FAILURE TO FOLLOW THESE WARNINGS AND
THE INSTRUCTION COULD RESULT IN SERIOUS INJURY OR DEATH.
SUFFOCATION HAZARD
INFANTS HAVE SUFFOCATED:
• IN GAPS BETWEEN EXTRA PADDING AND SIDE OF BASSINET/CRADLE, AND
ON SOFT BEDDING.
• USE ONLY THE PAD AND SHEET PROVIDED BY MANUFACTURER.
• NEVER ADD A PILLOW, COMFORTER OR ANOTHER MATTRESS FOR PADDING.
• NEVER LEAVE INFANT IN BASSINET WITH SIDE DOWN UNLESS IT IS
SECURELY POSITIONED IN SLEEPER MODE ATTACHED TO THE ADULT BED.
• TO REDUCE THE RISK OF SUDDEN INFANT DEATH SYNDROME (SIDS),
PEDIATRICIANS RECOMMEND HEALTHY INFANTS BE PLACED ON THEIR BACK
TO SLEEP, UNLESS OTHERWISE ADVISED BY YOUR PHYSICIAN.
ENTRAPMENT HAZARD
• TO AVOID DEATH FROM THE INFANT'S NECK BEING CAUGHT ON THE TOP
RAIL ON THE SIDE THAT IS NEXT TO THE ADULT BED, THE TOP RAIL MUST BE
NO HIGHER THAN THE ADULT BED MATTRESS.
• TO PREVENT DEATH FROM ENTRAPMENT, BEDSIDE SLEEPER MUST BE
PROPERLY SECURED TO ADULT BED USING THE ATTACHMENT SYSTEM.
• THERE MUST BE NO MORE THAN 1/2 INCH (13MM) GAP BETWEEN BEDSIDE
SLEEPER AND ADULT BED.
• CHECK TIGHTNESS BEFORE EACH USE BY PULLING BEDSIDE SLEEPER IN A
DIRECTION AWAY FROM ADULT BED.
• IF GAP EXCEEDS 1/2 INCH (13MM), DO NOT FILL THE GAP WITH PILLOWS,
BLANKETS OR OTHER ITEMS THAT ARE SUFFOCATION HAZARDS.
• ALWAYS READ AND FOLLOW ASSEMBLY INSTRUCTIONS FOR EACH
PRODUCT USE MODE (BEDSIDE SLEEPER/BASSINET).
• ALWAYS USE ALL REQUIRED PARTS FOR EACH USE MODE (BEDSIDE
SLEEPER/BASSINET).
• CHECK INSTRUCTION MANUAL FOR A LIST OF REQUIRED PARTS.
PERIODICALLY CHECK PRODUCT FOR LOOSE, DAMAGED, OR MISSING PARTS.

FALL HAZARD

• TO HELP PREVENT FALLS, DO NOT USE THIS PRODUCT WHEN THE
INFANT BEGINS TO PUSH UP ON HANDS AND KNEES OR HAS REACHED
MANUFACTURER'S RECOMMENDED MAXIMUM WEIGHT OF 20LBS, WHICHEVER
COMES FIRST.
• ALWAYS READ AND FOLLOW ASSEMBLY INSTRUCTIONS FOR EACH
PRODUCT USE MODE (BEDSIDE SLEEPER/BASSINET).
• ALWAYS USE ALL REQUIRED PARTS FOR EACH USE MODE. CHECK
INSTRUCTIONS MANUAL FOR A LIST OF REQUIRED PARTS. PERIODICALLY
CHECK PRODUCT FOR LOOSE, DAMAGED OR MISSING PARTS.
2