Advertisement
Fingerprint ID sensor
Fingerprint ID sensor prevents others from using your ROG Phone without your permission. You
can use your fingerprint to unlock your device, access your phone calls and data. When you set up
your fingerprint ID, you also need to set up your screen lock method for device startup.
Starting your ROG Phone for the first time
To set up your fingerprint ID when using your ROG Phone for the first time:
1. Ensure that the fingerprint identification module and your finger are clean and dry.
2. From the Welcome page, follow the on-screen instructions to the Protect your phone page and
tap Set up fingerprint.
3. Tap Continue to choose a screen lock method, and then follow the instructions to the Locate
fingerprint scanner page, and tap Next.
4. Find the fingerprint scanner on the front of your device, adjust your finger and try to cover
different areas of your finger repeatedly until your fingerprint is captured.
5. Tap Next to complete the setup.
26
Chapter 2: There's no place like Home
Advertisement
