Introduction To Use - tekkiwear T22 User Manual

IV Introduction to use
1. Light output, 2. Flash button, 3. Power button, 4. Display
Preparation for use
1. Please remove the hair from the skin surface first. Make sure to wet the hair, use wet shaving
method to make a good treatment of the skin in advance, so that the hair under the skin surface
can be absorbed by the light source to ensure the treatment course effect. If the hair is no more
than 2mm, you can use the instrument without shaving.
2. Clean the skin and make sure that there is no hair on its surface, it is completely dry and free
of oily substances.
3. Before using the photoepilator, it is strictly forbidden to apply condenser, aloe gel and other
products, otherwise there will be a lack of light (it is only necessary to apply it on large equipment
in beauty salons, but not for home use).
Steps for use
1. Take out the instrument, please clean the filter on the machine head with a soft cloth.
2. Before using this hair removal instrument, please wet the hair and scrape with a blade.
3. Connect the power adapter.
4. Press "Power button" for a long time until the display screen turns on (the machine turns on
when the content of the display screen changes).
5. When the content of the display screen changes from "flashing" to "always bright", it means
the epilator is ready (the first flash is bright, eyes may not adapt, please wear glasses to reduce
the discomfort of the flash to eyes).
6. The content of the display screen is "always on", and the appliance is in the state of "flash
ready", if the content of the display screen has not changed, try to unplug the power adapter
and restart the appliance.