Poltronova Gherpe Instructions Manual

about

use
indoor
typology
table lamp
year
1968
dimension 44/53 x 31 x 20/38 [h]
cm
weight 4.3 kg
materials laser cutting and
thermoformed
Perspex ® ,
accessories in
polished stainless steel
voltage
220—240 V
110—120 V
lamp
lamp fluorescent
1 x LED A60
10W
E27
6400K
certifications

warning

The safety of this fixture is only
guaranteed if the following instructions
have been complied with.
The lighting system is made only for
the voltage listed in the about section in
the left column, under voltage.
Always disconnect power before
cleaning the fixture or replacing the bulb.
Always allow the lamp to cool before
replacing it.
In order to place the curved parts of
®
Perspex , follow the instructions.
Maintain the fixture carefully so as
not to damage components.
Never place less than 20-30 cm from a
heat source.
If exposed to direct sunlight, the
materials used in this product may show
a natural chromatic variation.
Replacement bulbs must be of same
type and wattage as specified
in instructions.
Use the appliance only with the power
supply provided and at the rated voltage
specified on the appliance.
The appliance may in no way be
modified or tampered with. Any change
may compromise its security and void
the warranty.
Poltronova will not be liable
for products that are modified or
used improperly.
Poltronova will replace merchandise
with manufacturing defects only if
the product is intact in all its parts
and provided with the original or
equivalent packaging.
Centro Studi Poltronova
per il desi n srl
via Lorenzo Bartolini 2,
50124 Firenze — Italy
www.poltronova.it
info@poltronova.it