Poltronova Sanremo Instructions

about

use
indoor
typology
standing lamp
year
1968
dimension 38 x 38 x 225 [h] cm
weight
12 kg
materials base and trunk in
pearlescent lacquered
sheet steel, leaves in
laser-cut Perspex
voltage
220—240 V
110—120 V
lamp
1 x LED
GU10
8W max
6400K
certifications

warning

The safety of this fixture is only
guaranteed if the following instructions
have been complied with.
The lighting system is made only for
the voltage listed in the about section in
the left column, under voltage.
Always disconnect power before
cleaning the fixture or replacing the bulb.
Always allow the lamp to cool before
replacing it.
To place the leaves, follow the
instructions on the back.
Mount and maintain the fixture
carefully so as not to damage components.
Never place less than 20-30 cm from a
®
heat source.
If exposed to direct sunlight, the
materials used in this product may show a
natural chromatic variation.
Replacement bulbs must be of same
type and wattage as specified
in instructions.
Use the appliance only with the power
supply provided and at the rated voltage
specified on the appliance.
The appliance may in no way be
modified or tampered with. Any change
may compromise its security and void
the warranty.
Poltronova will not be liable
for products that are modified or
used improperly.
Poltronova will replace merchandise
with manufacturing defects only if the
product is intact in all its parts and
provided with the original or equivalent
packaging.
Centro Studi Poltronova
per il desi n srl
via Lorenzo Bartolini 2,
50124 Firenze — Italy
www.poltronova.it
info@poltronova.it