Table of Contents
Advertisement
q
g
1.
Water tank inlet cover
2.
Steam control
3.
Spray button
4.
Shot of steam button
5.
Temperature indicator light
6.
Temperature control
7.
Power indicator light
8.
Ceramic soleplate
9.
Water tank
10.
Safe-Store™ heat indicator strip
11.
Self-clean button
12.
Water level MAX indicator
13.
Temperature control index mark
14.
Spray nozzle
Before using for the first time
Warning: Remove all packaging including any soleplate protection before using
your iron.
Wipe over the soleplate with a cloth moistened with methylated spirit. Wipe off the
methylated spirit with a damp cloth then dry the soleplate thoroughly.
Before connecting your iron to the mains supply, make sure your supply voltage is the
same as the one indicated on your iron.
When you first use your iron, there may be a slight odour and it may smoke slightly for
the first few minutes of operation. This is quite normal and will disappear.
Cleaning your iron before use
Follow these simple steps to remove any impurities or residues inside your steam iron
that may be left over from the manufacturing process.
1.
Follow the instructions under filling your iron and fill the water tank as described.
2.
Empty the water tank to rinse out any foreign particles then refill it.
3.
Follow the instructions under steam ironing. Set the temperature to the MAX
setting and the steam control to the high steam setting.
4.
Iron an old piece of cloth (cotton or towelling is ideal) for a few minutes. While
ironing, press the steam button 4 or 5 times.
5.
Any impurities will be flushed from your iron by the steam and absorbed by the
cloth. Your iron is now ready for use.
w
er t y u
f
d
s a o i
3
Advertisement
Table of Contents
