König KN-PS800B, KN-PS900B - Body Scale Manual

Table of Contents

Description

The body scale is used to measure the body weight of human beings.

Device Overview

Display
Unit-of-measurement button	Press the button to adjust the unit of measurement: kilogram (kg), pound (lb) or stone (st).
Battery compartment	Open the battery compartment. Insert the batteries (4x AAA) into the battery compartment. Close the battery compartment.

Display Overview

Weight indicator	The indicator shows your body weight.
Low-battery indicator	The indicator comes on when the batteries are low.
Pending-data indicator	The indicator indicates that data are pending to be transmitted to your mobile device.
Transmitting-data indicator	The indicator indicates that data are being transmitted to your mobile device.
KG indicator	The indicator comes on when kilogram (kg) is set as unit of measurement.
LB indicator	The indicator comes on when pound (lb) is set as unit of measurement.
ST indicator	The indicator comes on when stone (st) is set as unit of measurement.
BIA indicator (KN-PS900B only)	The indicator indicates that a bioelectrical impedance analysis (BIA) has been performed.

Download and install the "Transhealth" app from Apple App Store or Google Play Store on your mobile device.
Open the "Transhealth" app.
Activate Bluetooth on your mobile device.
Go to the settings menu
Select "Add device" in the settings menu.
Press and hold the unit-of-measurement button for 5 seconds. The body scale will be paired with your mobile device.

Place the device on a stable, flat surface.
To reset the device, press the platform with your foot. The display shows "0.0". The device switches on automatically. The device is ready for use.
Step on the platform. Place your feet evenly on the platform without moving. The display shows your weight.
If the body scale is paired with your mobile device, the measurement data will be transmitted to your mobile device.
Step off the platform. The device switches off automatically.

Read the manual carefully before use. Keep the manual for future reference.
Only use the device for its intended purposes. Do not use the device for other purposes than described in the manual.
Do not use the device if any part is damaged or defective. If the device is damaged or defective, replace the device immediately.

Use only the batteries mentioned in the manual.
Do not install batteries in reverse polarity.
Do not short-circuit or disassemble the batteries.
Do not expose the batteries to water.
Do not expose the batteries to fire or excessive heat.
Batteries are prone to leakage when fully discharged. To avoid damage to the product, remove the batteries when leaving the product unattended for longer periods of time.
If liquid from the batteries comes into contact with skin or clothing, immediately rinse with fresh water.

Do not use cleaning solvents or abrasives.
Do not clean the inside of the device.
Do not attempt to repair the device. If the device does not operate correctly, replace it with a new device.
Clean the outside of the device using a soft, damp cloth.