(with/ Note without power cable). This signal word indicates important information (e.g. material damage), but does not indicate hazards. Info Information marked with this symbol helps you to carry out your tasks quickly and safely. cordless baton screwdriver PSCS 10-3,6V...
Cutting accessory contacting a "live" wire may make exposed metal parts of the power tool "live" and could give the operator an electric shock. cordless baton screwdriver PSCS 10-3,6V...
Page 4
(locked). This prevents unintentional starting of the battery packs. Use of any other battery packs may create power tool. a risk of injury and fire. • Wait until the power tool has come to a standstill, before putting it down. cordless baton screwdriver PSCS 10-3,6V...
Page 5
If you notice damages, no longer use the device. We recommend using the power tool with original Trotec Do not use the device when the device or your hands accessories. are damp or wet!
Page 6
Only change the rotational direction when the device is at a standstill! Otherwise the device might be damaged. Note Set the torque and rotational direction according to the operating mode. A wrong selection may damage the device. cordless baton screwdriver PSCS 10-3,6V...
LED work light Scope of delivery • 1 x Cordless baton screwdriver • 1 x Quick charger • 24 x Bits 25 mm • 2 x Bits 50 mm • 1 x Magnetic bit holder • 1 x Transport case • 1 x Manual cordless baton screwdriver PSCS 10-3,6V...
Page 8
Sound values according to EN 60745 Sound pressure level 63 dB(A) Sound power level 74.1 dB(A) Uncertainty K 3 dB(A) Vibration information according to EN 60745 Vibration emission value 0.216 m/s drilling in metal / screwing ah=in Uncertainty K 1.5 m/s cordless baton screwdriver PSCS 10-3,6V...
This includes consulting a dangerous goods specialist when preparing the package. – Only ship batteries if their housing is undamaged. – Please also observe any other national regulations. cordless baton screwdriver PSCS 10-3,6V...
/ power Orange – Red medium charge / power weak charge – Recharge the battery. 1. Press the on / off switch (12). ð You can read the battery status from the battery level indication (3). cordless baton screwdriver PSCS 10-3,6V...
Page 11
5. Let go of the locking mechanism at the tool holder (1). direction! On the clockwise / counter-clockwise rotation direction indicator (5) you can see in which direction the screws will be screwed. Do not use the drilling setting for screwing! cordless baton screwdriver PSCS 10-3,6V...
• Use a wood drill bit with centring tip. For deep drill holes, use an auger bit; for large drilling diameters, use a Forstner bit. cordless baton screwdriver PSCS 10-3,6V...
Page 13
When the handle is in horizontal position, the rotational direction must be selected contrary to the description in the chapter Selecting the rotational direction. Note the direction of the arrow on the clockwise / counter- clockwise rotation switch (5). cordless baton screwdriver PSCS 10-3,6V...
Contact the Trotec customer device to an authorized specialist electrical company or to service. Trotec for repair. • Check the charger connection for dirt. Remove any dirt. • The battery might be defective. Contact the Trotec customer service. cordless baton screwdriver PSCS 10-3,6V...
• Remove any drilling dust and, if applicable, wood chips from the tool holder. • Keep the connecting terminals on the device and charger clean. • Keep the ventilation openings free from dust deposits to prevent overheating of the motor. cordless baton screwdriver PSCS 10-3,6V...
The Section A addresses can be obtained from your municipality or local Herewith, we – Trotec GmbH & Co. KG – declare that the administration. For further return options provided by us please machinery designated below was developed, constructed and refer to our website www.trotec24.com.
Page 18
Trotec GmbH & Co. KG Grebbener Str. 7 D-52525 Heinsberg +49 2452 962-400 +49 2452 962-200 info@trotec.com www.trotec.com...