Related Manuals for Toro Flex-Force Power System 81101
Summary of Contents for Toro Flex-Force Power System 81101
- Page 1 Form No. 3455-415 Rev A Flex-Force Power System ™ 60V MAX Battery Charger Model No. 81101—Serial No. 323000001 and Up *3455-415* Register at www.Toro.com. Original Instructions (EN)
- Page 2 Introduction This battery charger is intended to be used by residential homeowners. This charger is designed to charge only Toro 60V lithium-ion battery packs. It is not designed to charge any other batteries. Using this product for purposes other than its intended use could prove dangerous to you and bystanders.
-
Page 3: Safety Alert Symbol
Model No. Serial No. Safety-Alert Symbol The safety-alert symbol (Figure 2) shown in this manual and on the machine identifies important safety messages that you must follow to prevent accidents. g000502 Figure 2 Safety-alert symbol The safety-alert symbol appears above information that alerts you to unsafe actions or situations and is followed by the word DANGER, WARNING, or CAUTION. -
Page 4: Important Safety Instructions
Authorized Service Dealer to replace it. III. Operation Charge the battery pack with only the battery charger specified by Toro. A charger suitable for 1 type of battery pack may create a risk of fire when used with another battery pack. - Page 5 • Do not disassemble the battery pack. • Replace the battery pack with a genuine Toro battery pack only; using another type of battery pack may cause a fire or risk of injury. • Keep battery packs out of the reach of children and in the original packaging until you are ready to use them.
-
Page 6: Safety And Instructional Decals
Safety and Instructional Decals Safety decals and instructions are easily visible to the operator and are located near any area of potential danger. Replace any decal that is damaged or missing. decal144-6024 144-6024 1. Read the 3. Double Operator’s insulated Manual. -
Page 7: Product Overview
Product Overview Specifications Battery Charger Model 81101 Type 60V MAX Lithium-Ion Battery Charger Input 220 to 240V AC 50-60Hz Max 2.0A Output 60V MAX DC 1.0A Battery Pack Model 81820 81825 81850 81860 81875 68810 Battery 2.0 Ah 2.5 Ah 4.0 Ah 6.0 Ah 7.5 Ah... -
Page 8: Operation
Operation Charging the Battery Pack Important: Charge the battery pack only in temperatures that are within the appropriate range; refer to Specifications (page Note: At any time, press the battery-charge-indicator button on the battery pack to display the current charge (LED indicators). Ensure that the vents on the battery are clear of any dust and debris. - Page 9 Refer to the following table to interpret the LED indicator light on the battery charger. Indicator Indicates light No battery pack inserted Green Battery pack is charging blinking Battery pack is charged Green Battery pack and/or battery charger is over or under the appropriate temperature range Red blinking Battery pack charging fault*...
-
Page 10: Maintenance
Maintenance Maintenance and servicing are not required under normal conditions. When you clean the surface of the equipment, wipe it only with a dry cloth. Do not disassemble the equipment; if it is damaged, contact your Authorized Service Dealer. Storage Important: Store the charger only in temperatures that are within the appropriate range;... -
Page 11: Troubleshooting
Troubleshooting Perform only the steps described in these instructions. All further inspection, maintenance, and repair work must be performed by an authorized service center or a similarly qualified specialist if you cannot solve the problem yourself. Problem Possible Cause Corrective Action The battery charger is not 1. - Page 12 We will never sell your personal information to any other company for marketing purposes. Retention of your Personal Information Toro will keep your personal information as long as it is relevant for the above purposes and in accordance with legal requirements. For more information about applicable retention periods please contact legal@toro.com.