Audio Device; Usb Hard Drive - Philips 6806 Series User Manual

Copy protection
HDMI ports support HDCP (High-bandwidth Digital
Content Protection). HDCP is a copy protection signal
that prevents copying content from a DVD disc or Blu-
ray Disc. Also referred to as DRM (Digital Rights
Management).
5.4

Audio Device

Digital Audio Out - Optical
Audio Out - Optical is a high quality sound
connection.
This optical connection can carry 5.1 audio programs.
If your device, typically a Home Theatre System
(HTS), has no HDMI ARC connection, you can use this
connection with the Audio In - Optical connection on
the HTS. The Audio Out - Optical connection sends
the sound from the display to the HTS.
Headphones
You can connect a set of headphones to the
headphone connector on the back of the display.
The connection is a mini-jack 3.5mm.
* Note: Display Speakers will be muted when the
Headphones are plugged in.
5.5

USB Hard Drive

Installation
Before you can pause or record a broadcast, you
must connect and format a USB Hard Drive.
Formatting removes all files from the USB Hard Drive.
1 - Connect the USB Hard Drive to one of
the USB connections on the display. Do not connect
another USB device to the other USB ports when
formatting.
2 - Switch on the USB Hard Drive and the display.
Follow the instructions on screen.
When the USB Hard Drive is formatted, leave it
connected permanently.
Warning
The USB Hard Drive is formatted exclusively for this
display, you cannot use the stored recordings on
another display or PC. Do not copy or change
recording files on the USB Hard Drive with any PC
application. This will corrupt your recordings. When
you format another USB Hard Drive, the content on
the former will be lost. A USB Hard Drive installed on
your display will need reformatting for use with a
computer.
11