Toro Wheel Horse 268H Operator's Manual page 35

Installing the Bulb
1. The bulb has metal pins on the side of its base.
Align the pins with the slots in the bulb holder
and insert the base into the holder (Fig. 35).
Push and rotate the bulb clockwise until it stops.
2
4
3
Figure 35
1. Bulb
2. Metal pins
2. The bulb holder has two tabs (Fig. 34). Align the
tabs with the slots in the reflector, insert the bulb
holder into the reflector and rotate it 1/4 turn
clockwise until it stops.
3. Push the wire connectors onto the terminals on
the bulb holder.
1
2
4
3. Bulb holder
4. Slots
Maintenance
33