Advertisement
Let's talk technical
Removing blockages from the TurboTool
Slide the locking ring
to remove.
Removing blockages from the hose
Remove the hose from the vacuum cleaner
and telescopic extension tube. Insert a broom
handle or similar blunt instrument into the hose
to remove blockage.
Lift and separate
the housing.
Using a pair of scissors,
cut any hair or debris free
from around the brushes.
Tabs
Line up the tabs on front of
housing and push together
to refit. Slide locking ring
into groove to secure.
To test for a blockage
in the hose, drop a
small ball of paper
into the hose.
The paper will
drop through if
the hose is clear.
Advertisement
