Subscribe to Our Youtube Channel
Related Manuals for Temptech COLD NMB47BG
Summary of Contents for Temptech COLD NMB47BG
- Page 1 INSTRUCTION MANUAL NMB47BG NMB115BG BEFORE USE, PLEASE READ AND FOLLOW ALL SAFETY RULES AND OPERATING INSTRUCTION. V2/2021...
-
Page 2: Important Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS To reduce the risk of fire, electrical shock, or injury WARNING when using your appliance, follow these basic precautions: ·Before using the appliance, please read this user manual to ensure that you gain the maximum benefit from it. WARNING: This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or... -
Page 3: Installation Instructions
INSTALLATION INSTRUCTIONS This appliance is designed to be free standing only, and should not be recessed or built-in. Place your appliance on a floor that is strong enough to support the appliance when it is fully loaded. To level your appliance, adjust the leveling legs at the bottom of the appliance. ... -
Page 4: Product Instructions
PRODUCT INSTRUCTIONS NMB47BG 1: Upper Hinge 4: Door Handle 2: Door Gasket 5: Adjust Foot 3: Shelf 6: Bottom Hinge NMB115BG 1: Upper Hinge 4: Door Gasket 2: Door Handle 5: Adjust Foot 3: Shelf 6: Temperature Control... -
Page 5: Operating Your Unit
OPERATING YOUR UNIT Setting the Temperature Control NMB47BG NMB115BG 1) The temperature control knob is a device to adjust the temperature in the refrigerator. The gear on the knob does not represent the temperature value. At the same ambient temperature, the larger the gear, the lower the temperature in the box;... - Page 6 THERE ARE THREE SHELVES IN NMB115BG NMB47BG When the surrounding temperature is 25°C and the pantry has no load, it will take around 30 minutes to decrease the pantry ’s temperature from 25°C to 17°C The pantry is recommended to be designed at 17°C. The energy consumption is 0.132kWh/24h. If ...
- Page 7 GENERAL FAULT DESCRIPTION If the product is not working properly, please check and handle according to the following methods. If the situation can not be changed, please contact the local after-sales service center in time, and be sure to provide the model name and product number in detail. The refrigerator doesn't work Is the power on? Is the power supply voltage too low?
- Page 8 Service@temptech.no How to find the model information in the product database: Please visit our website https://temptech.no/ to find the instruction about how to find production information in EU database. We take reservations about typing faults and if any problems occure, please contact us at...
Need help?
Do you have a question about the COLD NMB47BG and is the answer not in the manual?
Questions and answers