Timer - Novy Power 1724-2 Instructions For Use And Installation

•
Start up / Stop Super Power
Action
Start up the Power
Start up Super Power
Stop the Super Power
Stop Powerr
•
Power management:
If the selected heating levels for both zones exceed the maximum available amount of power, the
power management function is automatically reducing the power from one of these zones. The
display of this zone is first blinking; the level is then automatically reduced to the highest suitable
position.
Heating zone selected
[ P ] is displayed

Timer

The timer is able to be used simultaneous with all heating zones and this with different time
settings (from 0 to 1H59 minutes) for each heating zone.
•
Setting and modification of the cooking time:
Action
Select a zone
Select the power level
Select theTimer
Decrease the time
Increase the time
After a few seconds, the [
The time is confirmed and the timer starts.
•
To stop the cooking time:
Action
Select the Timer
Stop the time
If several timers are activated, repeat the process.
Control panel
Slide to the end of the "SLIDER"
Or press directly on the end of
the "SLIDER"
Re-press key [ P ]
Slide on the "SLIDER"
Slide on the "SLIDER"
The other heating zone: (example: power level 9)
[ 9 ] goes to [ 8 ] and blinks
Control panel
Press a zone
slide on the "SLIDER"
Press key [ ]
Press key [ - ] from the timer
Press key [ + ] from the timer
] display stops with blinking.
Control panel
Press key [ ]
Press key [ - ] from the timer
70
Display
[ P ]
[ and P ]
[ P ] to [ 0 ]
[ 9 ] to [ 0 ]
Display
[ 0 ]
[ 1 ] to [ P ]
Timer display on
[ 60 ] to 59, 58...
Time increase
Display
Timer display on
[ 000 ]