Positioning The Transom-Mount Transducer; Transducer Mounted On Transom; Transducer Bracket, Side View - Raymarine FishFinder L265 Instruction Manual

Allow a clearance
of at least 10
inches (254 mm)
10"
(254 mm)

Positioning the Transom-Mount Transducer

Begin by finding the best location for the mounting bracket. Here are the
rules:
• If your boat has one propeller (outboard or inboard-outboard), mount
the transducer about 18" (455 mm) to the side of the centerline of the
boat. See Fig. 2-3. Choose the side that is on the downstroke of the
propeller. (This is usually the starboard side of the boat.) This will
reduce any interference caused by air bubbles.
Installation
Fig. 2-3
Transducer
Mounted on
Transom
Transducer in
released position
Fig. 2-4
Transducer
Bracket,
Side View
7