One for All URC1241 Manual page 7

SETUP
Deleting a learned function
If you want to delete a learned function and return that keys to its
original state, you can use the following procedure:
1.
2.
3.
4.
VOLUME LOCK
If you primarily use one device for controlling volume, for example
a Sound Bar or Audio Video Receiver, it's possible to program your
Essence remote to only control that device when you use the Volume
Up, Down and Mute keys. To do this:
1.
2.
3.
4.
From now on, pressing the Volume Up, Down or Mute keys will always
control the Audio device, no matter what device you are controlling.
To unlock the volume, and return the remote to controlling each
device's volume individually, the procedure is:
1.
2.
3.
Connect with us
facebook.com/
oneforallworldwide
713426_1-3_21T_Printfile_URC1241_ESSENCE_4_RDN1010623.indd 7 713426_1-3_21T_Printfile_URC1241_ESSENCE_4_RDN1010623.indd 7
Press the Device key for the device you want to learn functions onto.
Hold down the Setup key until the LED under the
Device key blinks twice.
Press 976 – the LED should blink twice
Press the key you want to reset twice – the LED should blink
twice and the learned function has been deleted.
Hold down the Setup key until the LED under the
Device key blinks twice.
Press 993 – the LED should blink twice.
Press the device key for the device to always control
volume – for example Audio.
The LED will blink twice.
Hold down the Setup key until the LED under the
Device key blinks twice
Press 993 – the LED should blink twice
Press VOLUME DOWN – the LED will blink four
times and Volume is now unlocked.
@oneforall.worldwide linkedin.com/
company/one-for-all-worldwide/
7
youtube.com/
user/oneforallproducts
31-05-2023 14:12 31-05-2023 14:12