Advertisement
Quick Links
For optimum performance, please read this Instruction Manual before playing.
· Bass Drum Shell
· Bass Drum Heads
· Bass Drum Hoops
· Bass Drum Tension Rods, Claws
· Bass Drum-Mounted Cymbal Holder
· Tom Tom
· Tom Holder
· Floor Tom Shell
· Floor Tom Heads
· Floor Tom Hoops
Hi-Hat Stand
Cymbal Boom
Stand
Instruction Manual
Congratulations on your purchase!
Contents
x1
x1pr
x1pr
x12
x1
x1
x1
x1
x1pr
x1pr
Tom Tom
· Floor Tom Tension Rods
· Floor Tom Legs
· Hi-Hat Stand
· Drum Pedal
· Pedal Clamp Plate
· Snare Drum
· Snare Stand
· Cymbal Boom Stand
· Tuning Key
Tom Holder
Snare Drum
Bass Drum
Pedal Clamp Plate
Snare Stand
x12
x3
x1
x1
x1
x1
x1
x1
x1
Bass Drum-Mouted
Cymbal Holder
Floor Tom
Floor Tom Legs
Drum Pedal
Set-Up Example
Advertisement
Related Manuals for Pearl MIDTOWN
Summary of Contents for Pearl MIDTOWN
- Page 1 Instruction Manual Congratulations on your purchase! For optimum performance, please read this Instruction Manual before playing. Contents · Bass Drum Shell · Floor Tom Tension Rods · Bass Drum Heads x1pr · Floor Tom Legs · Bass Drum Hoops x1pr ·...
- Page 2 The three Hazard Signs, as shown below, appear periodically throughout the product instructions to alert the user or others to possible danger or injury. For safe assembly and use of this, or any Pearl product, never ignore a Hazard Sign and ensure the threat level and corresponding instructions are entirely understood.
- Page 3 1. Place the Shell on a clean, solid surface with the front side (the side with the Bass Drum Spurs attached) Tension Rod facing upwards. Put the Front Head with Pearl Logo on Bass Drum Hoop the Shell then attach the Bass Drum Hoop with flat side Cutaway down on the Rim of the Head (Fig.1).
- Page 4 Drum Pedal Setting Tom Tom Setting Position the Bass Drum upright as shown and attach your Insert the long ends of the Tom Holders into the Tom Bass Drum Pedal to the Pedal Clamp Plate. Adjust the Holder Bracket on the Bass Drum as shown (Fig.7) and height of the Pedal Clamp Plate and the length of the tighten the Wing Nut on the Tom Holder Bracket.
- Page 5 Cymbal Holder Assembly Floor Tom Assembly 1. Insert the L-Rod into the Bracket and tighten the Wing The Floor Tom is packed with the Shell, Steel Hoops, Heads and Floor Tom Legs unassembled. Please follow Nut (A), as shown in (Fig.10). the assembly instructions below to assemble the Floor 2.
- Page 6 Hi-Hat Stand Assembly Drum Pedal Assembly Open the legs of the hi-hat to form a stable tripod. Insert Insert the ends of the radius rod into the holes near the the ends of the radius rod into the holes near the bottom bottom of the pedal base.
- Page 7 Snare Stand Assembly Basic Tuning Open the legs of the stand to form a stable tripod and Here is the basic tuning method using the snare drum as insert the top section into the base. Open the basket and an example. Gradually tighten the tension bolts diagonally adjust the tilter, so the basket assembly is flat.
- Page 8 CAUTION Make sure that all Wing Bolts, Wing Nuts, Bolts and Screws on the Stands and the Drums are tight before playing on your drum set. Please refer to the Set-Up Example on the cover page of this manual to see the completed kit. https://pearldrum.com Products and specifications are subject to change without notice.
Need help?
Do you have a question about the MIDTOWN and is the answer not in the manual?
Questions and answers