1. Manuals
  2. Brands
  3. Ash Manuals
  4. Microscope
  5. INSPEX 3
  6. Quick start user manual

Ash INSPEX 3 Quick Start User Manual

Hide thumbs Also See for INSPEX 3:
Table of Contents

Advertisement

Quick Links

Download this manual
Quick Start User Guide Rev 2.1
INSPEX
3
*You will find your full
Please remove standard +5 lens before installation of +10 plan1x, +25 or +50 lens.
Also ensure the newly installed lens is selected in System settings and save to Startup

STEP 1: ESD Grounding Cable Assembly (Optional)

Remove the INSPEX
Screw the cable as indicated with the M4 screw provided. Ensure that the
1.
cable is pulled upward during assembly.
When screwed in place, bend the cable so that it feeds outward.
2.
3.
Ensure that the bottom ridge
could stop the INSPEX
1
STEP 2: Mouse & Keyboard Set-Up
Remove USB dongle from the underside of the mouse.
1.
Ensure mouse is switched to on. Ensure keyboard is switched to on.
2.
3.
Remove USB dongle from the underside of the keyboard located in the
batteries compartment.
Remove yellow "arrow" tab in the keyboard.
4.
2
1
Quick Start User Guide
INSPEX
3 User Manual on the supplied USB.

INSPEX 3 Hardware Setup

3
Camera Head and all cables from packaging.
3
Arm bracket from attaching correctly.
2
1
3
Settings.
*
under the screw has not been covered as it
4
3
ASH
*
2

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the INSPEX 3 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Ash INSPEX 3

Summary of Contents for Ash INSPEX 3

  • Page 1 Please remove standard +5 lens before installation of +10 plan1x, +25 or +50 lens. Also ensure the newly installed lens is selected in System settings and save to Startup Settings. INSPEX 3 Hardware Setup STEP 1: ESD Grounding Cable Assembly (Optional) Remove the INSPEX Camera Head and all cables from packaging.
  • Page 2 USB port to free up a side port). Now hook the INSPEX on to the hooks of the Arm Receiver by slotting the 4 hooks into the unit. Tighten the front 2 Thumb Screws on both sides to secure the INSPEX 3.
  • Page 3 Quick Start User Guide Rev 2.1 INSPEX 3 Software Setup STEP 5: Setting the Correct Height for Measurement Press and hold the power button on the INSPEX to switch on. Click on the Settings icon on the main toolbar on the right-hand side of your screen.
  • Page 4 Quick Start User Guide Rev 2.1 STEP 6: Camera & System Settings Click on the Settings icon on the right-hand side of your screen. In Camera Settings, adjust exposure and lighting setting to suit test sample inspection conditions e.g. Ringlight Settings: •...
  • Page 5 General Safety • Indoor use only • Exercise caution when lifting, handling or moving the Inspex 3. • Exercise caution when installing or removing accessories, ensuring a central and stable body position, thus preventing any possible strains or injury. •...
  • Page 6 Quick Start User Guide Rev 2.1 Electrical Safety To prevent electrical shock or accidental short circuits leading to component damage, follow the points outlined below. • Ensure proper grounding of AC adapters. • Do not operate with open housing, both from a safety and warranty perspective (there are no user-serviceable parts or fuses in the system).

Table of Contents